Category : Metal Roofing



Standing Seam Metal Roof Colors – Choose From Vibrant Hues To Muted Shades

Standing seam metal roof colors are available in range of shades that will add vibrancy and life to your home and its surroundings. Choose from vibrant reds, cool blues and pleasing greens. Whites, blacks, charcoal grey and several other shades in between are available for the different standing seam metal roof styles. Forget, the past when people had to be content with one dull shade for their metal roofs. Look around you as more choices become available people are becoming more adventerous and choosing bold and striking shades that catches the eye.

The beautiful standing seam metal roof colors bring out the charm of any type of home whether it’s modern or an old colonial home. A bold red roof catches people’s attention even as they approach your home. A dark blue shade set’s your home apart as a stately and sedate place. Muted greens reflect the nature around you. Whites reflect light and keep the home cool. Standing seam metal roof black and greys give off the old world charm.

You can choose painted metal roofs in striking color or choose to go with bare metals themselves. Either way, standing seams enhances the line of the roof and enhances the shadow lines that run from the top of the roof to its edge in a sloping roof. It dramatically brings to attention the slope and plane of the roofing angle. You can choose from the different standing seam metal roof colors from the color palette available with every maker of the metal roofs. The standing seam metal roof cost will be more for the painted metal panels than bare metals.

Color is not a big determining factor in standing seam metal roof costs, which will vary depending on factors like the metal used, the colors chosen, the area of the roofing, the labor costs, the transportation cost and standing seam metal roof styles chosen. Metal roofs are versatile and can be used for residences, industrial units and businesses. The same metal sheets can also be used for sides. Choose two different standing seam metal roof colors to create contrasting effect. Same with styles. Two different standing seam metal roof styles will also create a nice effect.

When two different materials are used for metal roofing care should be taken that they are compatible. Metals are prone to corrosion when in contact with certain other metals. This should be avoided at all costs. Experienced roof layers and roofing contractors will be usually aware of such factors and will surely warn you if you are going for incompatible materials. Same way the contractors will know to make provisions for expansion of metals during summer and contraction during winters. The roofing should have sufficient overlay to prevent any leakages due to this contraction and expansion. If your area is prone to wet weather and resultant growth of moss, choose standing seam metal roof colors that mask this or consult with experts on how to prevent this from happening.

There is plenty of choice as far as standing seam metal roof colors are concerned. What you choose depends on your tastes and your home’s overall look and feel. But, you need to aware that you are no longer restricted to choosing from 2 or 3 colors when there is wide palette to choose from.

CONTINUE READING

An Overview of Metal Roofing Systems

Metal roofing systems are the subject of many frequent questions from home owners looking to choose a roof for their residence. This is more so in areas where metal roofing isn’t very common and where people consider traditional asphalt shingle roofing more durable and sturdy than metal roofing systems.

This limited exposure to metal roofs leads to some mistaken perceptions such as the belief that standing seam roofs are the best metal roofs in existence. But that simply is not true. Every kind of roofing system has some drawbacks and limitations.

How To Compare Metal Roofing Systems?

There are many different kinds of metal roofing systems. Each has unique advantages and drawbacks. Many are better alternatives than standing seam roofs. And to compare them against each other in order to make an informed decision, you’ll have to consider issues like system design, quality of the roofing material, installation ease and cost of the roof. Generally, the easier a roof is to install, the cheaper it will be.

Steel and Aluminum Shingles

Interlocking metal shingles have locks on all sides that hold the shingles in place. They prevent water or ice from seeping through, and the roofing contractor will install them using nails or clips to hold the shingles tightly to the deck. This form is versatile and can adjust to any kind of roof. Steel and aluminum shingles can be fitted onto valleys, sides and end walls, while fitting them around skylights and chimneys is easy too.

Standing Seam Roofing

There are benefits and drawbacks to using standing seam metal roofing. The biggest advantage is that they are extremely durable and will stay for decades. The level of protection afforded to your home is great, and these roofs can tolerate extremes of weather and temperature. The more sturdy forms that allow walking on them are slightly costlier.

The downside to standing seam metal roofs is that the cost escalates for more complicated installations and for steep roofs. Moving around while installing these roofs is difficult and dangerous. Special kinds of ladders and equipment is required for installing these roofs.

The design of standing seam roofs is also flawed. Ribs on the panels make them even harder to install. With specific kinds of roofs such as ones needing flashing, this can become an intricate and complex procedure, which naturally increases the cost involved. That’s why, even if standing seam roofs are a good choice for ‘simple’ roofing projects, they can be a nightmare for more complex roofing needs.

Corrugated Steel Roofing

Metal roofing systems that are based on corrugated steel are another option. Fasteners are exposed, and the material is cheap (usually 29 GA) and can be painted using acrylic colors. They rust easily and have limited durability and also are more prone to leaks. This makes them unsuitable as metal roofing systems of choice, especially when compared to more efficient systems like standing seam and metal shingle roofing.

In the final analysis, even if standing seam roofs look very attractive and aesthetically appealing, your best choice for a metal roofing system will be the interlocking metal shingles made of steel or aluminum. They will give you the same level of protection and durability at less than one-half the price of a standing seam metal roof. Your roofing contractor will also be happier at installing the simpler metal roofing system.

CONTINUE READING

Metal Roofing Installation – A Simple Guide To A Difficult Task

The actual process of metal roofing installation begins far before the first brick is laid or the first shingle lifted out of the bundle. Preparing for metal roofing installation involves taking safety precautions, measuring the roof, deciding what roofing panels to use and installing the roofing underlayment.

After this, you’ll have to assemble the tools and roofing materials you will require for metal roofing installation. Only after this does the actual process of installing a metal roof begin. In this report, we’ll talk about the actual installation process, including some special installation methods which differ from the commonly used alternatives.

Accessories for metal roofing installation such as skylights or chimney construction will not be covered, as it is highly unlikely that a do-it-yourself home owner will find it interesting – and professionals would have learned it from peers and experience already!

DIY Metal Roofing Installation

The basics involve making some assumptions about the kind of roof you plan to install. A simple gable roof on a residential building is the model on which we will discuss this process. With modification, the same principles can be adapted to other kinds of roofing.

A drip edge needs to be installed first. This is simple, yet cahllenging to a beginner. All existing drip edges and rotting materials must be removed before installing your new roof. You can place your drip edge under or above the underlayment. There are benefits to doing it both ways, such as lessening the chance of damp and moisture collecting after rains, and safety considerations. Also, if the size is larger than the roof, trimming it may be difficult later on.

And ultimately it makes little if any difference by way of performance. Metal roofing will prevent water seeping through, and only what condensation happens on the underlayment is an issue. If rainwater does manage to seep through to the underlayment after your metal roofing installation, then you have a serious problem on your hands.

Your drip edge will be installed with screws or 8″ nails in a staggered fashion. Be sure to aim for higher rigidity by overlapping the edges by two inches or more. Drip edges must also be installed over the eaves.

For metal roofing installation, your supplier plays an important role by delivering trim of specifications that you choose. Standard trim that your supplier stocks may not be suitable for your needs, so be sure to state your requirements, even supporting them with a rough drawing of the kind of roof you are going to install. A little planning will save you endless worry down the line.

Gable or Rake Trim Installation

You have a choice when it comes to trimming your roof gables. You can use a special gable trim or a regular drip edge. You can install the gable trim at the beginning or end of your metal roofing installation. By bending up an inch or so of the outside edge of your panel, you’ll create a hok to hang your gable trim from. You could also achieve the same result by cutting and folding the double lock panel.

Don’t worry if it doesn’t look pretty, as the gable will cover this up. With longer panels, creating this can be tough work. Run some measurements to make sure things are just right. Otherwise you may end up with a panel that butts out by a couple of inches, destroying the aesthetics of your metal roofing installation. Now hook your gable into the lock, pull it down, and screw it together using a gasket made of rubber.

Metal Roofing Installation – Roof Panels and Field Panels

The first panel of your metal roof is the most important, as it sets the tone for the rest of the project and the overall appearance of your finished roof. You should take special care that the penetrations are not lined up with the lock, as that will cause problems while installing flashing.

Create the hook lock starting from the bottom of a panel. A tiny ‘ear’ that projects out can be wrapped and crimped around the edge after installing the roof panel. Making sure that your roof panel is correctly aligned with the rake board before screwing it into place will ensure that the standing seam metal roofing installation is secure and attractive.

Place clips at intervals of 10 to 12 inches and take care to avoid denting the metal roofing panels. Depending on the underlayment, select the number of screws to avoid splitting the board. After the first panel is snapped into place, follow it up with the other panels while pushing each panel as far up as you can before locking it into place. It’s best to use a rubber mallet to thump the panels into place than using your hands. Repeat the process until all sides of the building are covered.

Installing Ridge Caps

Never install a ridge vent system on a low slope roof as the risk of water seeping through is high. The same goes for ridge caps which should keep your metal roofing installation waterproof and secure. After all z-bars are in place, you are ready for the ridge cap to be installed. Bend it into shape, align it with the panels on both sides, and hook the locks into the opposing z-bars before crimping on the ridge cap itself. Apply caulking where the connection with other pieces will be, without using screws. This will make the seal watertight.

Hopefully this short guide is of some value with your metal roofing installation. Remember that this is not a ‘how to’ guide and that you are responsible for any risks you take, consequences you experience, or injuries you sustain due to lack of care and safety. Do not rely on this information for anything except general information about the topic of metal roofing installation and contact a professional contractor for specific advice about roofing your home or building.

CONTINUE READING

Why Is Metal Roofing So Popular With Home Owners & Roofing Contractors Alike?

Metal roofing is very popular these days. And that’s with good reason. Some home owners still ignore the benefits of metal roofing, but that’s often due to a lack of enough information. Let’s discuss important issues like metal roofing price and metal shingles and then the nuances to metal roofing installation in this article.
Metal roofing carries some significant advantages over other forms of roofing material. The installation expenses of metal roofing are higher than other kinds. But overall, this can be a more economical roofing solution because of the durability and increased longevity that minimizes the cost of renovation and repair over the coming decades.
The higher expense of installing metal roofing has always been a contentious issue between roofing contractors and owners. At first glance, the higher cost of metal roofs and metal shingles turns home owners away from the material towards asphalt roofing or other alternatives. A good contractor will always explain how the use of metal for roofs will end up costing less over time, and stress on the other advantages of metal roofing like the lighter weight and how simple installation will be. In fact, the latter is the primary reason for standing seam metal roofing to be popular today.
Metal roofing shingles are more durable and last longer than asphalt roofing shingles or any other kind of roof material. Twenty years is the bare minimum of time during which you can expect a metal roof to be trouble-free, with more typical lifespans ranging from 30 to 50 years. This means you not only save money from costly repairs but are also not hassled by the need to constantly inspect and monitor the performance of your roof regularly.
As a direct consequence of this higher longevity, many home insurance companies will offer you a lesser premium on the same level of cover because the chance of your metal roof initiating a repair or maintenance claim is so low. And that’s not all. The addition of a metal roof actually increases the valuation of your property which means you are more likely to get a good price if you ever decide to sell your property later on.
As far as style or design and aesthetics go, metal roofing shingles offer many diverse options and choices. Metal roofing colors can be chosen to match the exterior of your home. You can find metal shingles in any texture or design that complements the overall architecture of your building. And the nice part of going with a metal roofing for your home is that there is little if any maintenance work involved.
Corrugated metal roofing is very strong and can withstand extremes of weather and hold up to even heavy loads like snowfall in cold climates. The roof is also resistant to mildew and fungi, and insects cannot make a dent in them easily. Metal roofing does not degenerate the way asphalt shingle roofing will over time.
Despite all these advantages, there are still some misconceptions among home owners that makes them shy away from metal roofing. Some believe that a metal roof will attract lightning. This is not true. Metal roofs are just as likely as any other kind to be subject to lightning strikes. And because metal is a good conductor of electricity, and won’t catch fire, even in a strike, much of the energy will be conducted through to the earth. So in a sense, metal roofing is actually safer than others.
Metal roofing thus has many advantages for home owners making it not at all surprising that so many are making it their first choice. What you save on repair and renovation offset the higher installation expenses, making it a great option for any kind of roof.

CONTINUE READING

About Metal Roof Shingles

Cashing In On Metal Roofing

Roofers are not the only ones to have recognized the benefits of it. the US government has established an Energy Policy Act of 2005 that rewards homeowners who have opted for the installation of a metal roof. In order to qualify for the Energy Star program requirements, an energy efficient improvement to one’s home must include a pigmented metal roof.

Because the majority of metal roofing manufactured today is at least 25 percent solar reflective for steep roofs and 65 percent solar reflective for low slopes, most metal roofing systems qualify for the credit. The tax credit savings on a metal roof under this act can reach up to $500, and is deducted directly from one’s “total tax liability”, such that it can reach sums in the thousands. To get in on this savings bonanza, speak with one of our metal roofing contractors about installing a qualifying metal roof system – they will be happy to help.

Read the rest of this article about metal roof shingles here.

By Eldad Levi

Article Source: http://EzineArticles.com/?expert=Eldad_Levi

http://EzineArticles.com/?Metal-Roofing-Materials&id=3070946

CONTINUE READING

Steel Roofing – Gaining in Popularity, With Good Reason

Steel roofing isn’t new. It’s just newly popular!

Though Galvalume steel roofing has been around for several decades, the aluminum and zinc coated steel that is durable and long lasting is only recently gaining popularity among commercial building and home owners. Architects and engineers, contractors and home owners alike are curious about the benefits and risks of steel roofing. Most questions are about longevity and availability, installation expenses and maintenance costs.

Steel roofing is suitable for use in both residential and non-residential buildings. Low slope standing seam roofing is one of the most common uses of steel in non-residential buildings. Steel shingle roofs which come pre-painted can even enhance the appearance of buildings.

But why is steel roofing such a good choice?

For one, it is incredibly resistant to corrosion so that steel roofing lasts for a very long time. Steel is malleable and easy to roll into panels and sheets, or even molded into roof shingles.

Painting and coating steel roof shingles can enhance their appearance while adding protection. Galvalume roofs are strong enough to resist cracking or peeling in extreme weather.

Standing seam roofing in non-residential buildings avoids the dangers of leaky roofs. Conventional roofs will undergo an inevitable degree of wear and tear over time, leading to cracks, leaks and tears. Water seeps into the roof and then soaks through to the building, causing damage and danger.

Repairs of these leaky roofs can cost a lot more over time than a slightly higher initial investment into durable and stable steel roofing systems. Easy to install, tough, and leak-proof, steel roofing is therefore a very desirable solution in all kinds of weather and climates.

Steel roofing is also useful in retrofit roofing as it can be applied directly over existing roofs without needing costly tearing down. This even makes it environment friendly and suitable for many different kinds of constructions. Also, the productivity of commercial establishments is enhanced with steel roofing as work can continue uninterrupted inside the building even as the roof is being re-laid.

Wood or steel decking for architectural roofs on residential buildings are better not installed directly on the existing roof frame. Felt that covers the decking adds a level of protection against the elements.

Millions of buildings now boast of a steel roofing system. These are rapidly growing to become mainstream options that are economical and effective. Read more about the advantages of steel roofing in this article.

CONTINUE READING

Metal Roof Shingles – A Brief History

Metal roof shingles have a long and interesting history. I found this article that explores some of the rich heritage of metal roofs. Enjoy.

“Metal roofing has a long history and has been around for hundreds of years. Ancient buildings had beautiful metal roofs that served many purposes.

Being light weight and strong they were useful in earthquake prone areas and could also withstand strong tropical storms. These metal roof types were not only aesthetically appealing but also resistant to fire, hail and ice. They are also extremely durable lasting much longer than other roofing shingles and clay tiles.

The water run off from metal roofs could be stored in containers for later use. There a wide variety of metallic roof styles, colors, designs and patterns to choose from. The many benefits of metal roofs have always made them a popular choice in roofing. In older barns you would have seen corrugated metal roofing.”

There’s a lot more to explore on the
Metal Roof Shingles directory.

CONTINUE READING
1 2 3 4 5